| Home >>  

 
Model HS-1000S
  Control System:
  • The control system with built-in microprocessor automatically controls all programs including sterilization cycle, digital display, self-disgnosis and printing.
  • While in operation, it measures, controls and shows in digital display the time, temperature and pressure, etc.
  • While the power is failed, the Real Time Clock driven by its own back-up battery keeps displaying the present year, month and time
  • If the power supply is failed while in cycle, it maintains the present state by its own back-up battery; if the power supply is resumed within one minute, continue the cycle which was inexecution and if one minute has passed, the cycle is disposed to an error.
  • The control system is of a highly compact type; with one-touch of starter the chamber door is locked and then all phases such as condition, sterilization, exhaust, drying, completion, printing and even the door unlocking are automatically performed.





  Control System:
  • Size: 61.5cmW x 48.5cmH x 79cmD
  • Sterilization Temp.: 121°C ~ 132°C
  • Sterilizing Agents:
    Saturated Steam of 1~2.1 bar Pressure
  • Air Removal: Vaccum / Gravity
  • Noise: Maximum 75cB (A)
  • Vacuum Pump: Flow Rate = 11l /min.
  • Rated Voltage: AC 230 V, 50/60Hz
  • Power Consumption: 2000 Watts
  • Controls: Microprocessor
  • Display: 160 x 128 Dot Graphic Display, LCD
  • Printer: Dot Matrix, 40 col., single color
  • Paper Roll: W57.5mm x L22m
  • Weight (gross): 104kg.
Model HS-3041V










 
 
Autoclave

Specifications:
  • Dimensions: 56cmW x 42cmH x 64cmD
  • Heater element power: 2.5Kw-3Kw
  • Voltage: 220V, 50/60Hz
  • Matched parNet Weight: Approx. 60Kgs.t: Stainless Steel Shelf
  Features:
  • Just open the water supply valve to fill the chamber with water and set sterilizing/drying time, the cycles from the heating-sterilization-drainage-axhaustion up to drying are automatically operated. A buzzer sounds on completion and the power is automatically cut off.
  • It takes only 5 minutes to sterilize unwrapped loads. Automatic air vent expells the unsaturated steam and the timer starts at pre-set temperature to ensure the complete sterilization.
  • A special drying design combines with timer to get the excellent drying in sterilizing wrapped loads and rubber items.
  • Safety devices are incorporated to ensure complete safety and protection.











  Specifications:
  • With acoustic signal and indicating lamp for welding time.
  • Constant, permanently set sealing pressure
  • Electronic, automatic sealing time system
  • No warming-up time
  • Controlled material consumption
  • Integrated holder for the roll of foil
    Built-in foil cutting device

Impulse Sealing Unit




Copyright © Medbanc Incorporated 2003-2004 | The authority in medical equipment.